Cool idea. Would like some sensors again but definitely need to be proper integrated ones rather than big lumps on the stems.    Another one that is a heap more work but very needed is decoding DCCD stuff for the dash so an aftermarket one can display it. Seems a real pain for anyone wanting to go full digital with no way to show current mode/settings. 

While there are some canbus messages ID decoded I haven’t found a great one.   Looking for: TPMS tire pressure  Intake pressure DCCD g force sensors etc Currently trying to build a TPMS canbus to bluetooth aftermarket sensors. Have managed to write the code to detect and read sensors now I understand how they work. Going to try and make the code user friendly so anyone can buy and pair sensors and connect them to car. Just a little LCD on a hide away box that triggers the OEM dash light or the dash top screen.

Fitted second front speaker.   Had a few issues getting kicker KEY amp to auto EQ.   https://kickernz.co.nz/car-audio/amplifiers/key-smart   First time failed since new front are 6dB more sensitive needed to fade to rear manually by ear until seemed close. Second was failure from volume not loud enough. Third time it succeed. New speakers are way clearer than old ones, but still sounds better after EQ. Mainly more lower mid bass the rest was already nice and flat. New 3/4” silk dome tweeters are better than the cloth 1/2” ones. Clean and soft highs, nothing harsh even at loud volumes. Though new retail price is nearly 10x different, lucky no one wants car audio much anymore so got them dirt cheap.     Plus had to add sound deadening to outer door skin this side since the door was replaced when handle was screwdrivered and bent metal. Panel beaters  just swapped door rather than they to fix the handle mounts etc. With they added dynamat sheet between door and interior trim, they didn’t do the reflection pad.  

Nothing Subaru as of the past 4 years? Other than Put a Battery in it and move it to mow the lawns     still needs a head gasket : still have a Spare V4 Motor on a Pallet in my Shop   Instead : I put a Battery into the Red car and Drove it to Local Car Club Meeting last night 😎    Auto-X's coming up so now I have motivation to fix that!

Installed one speaker in passengers door, ran out of time with other little bits I found today.   Found sound deadening was pushing old speaker into grill. Was the 2mm tar and foil stuff. Removing it isn’t hard but the foil is razor sharp as I found out.   Ground inner grill to make more clearance. Added some foam to door skin where no factory wool was covering.   Found issue with driver door lock. passengers one has a ball and little pin. Drivers one doesn’t have the pin. Must have broken off when they tried to break the lock.   found air vent to passengers front foot well was unclipped and loose. How it came loose I don’t know but it was a pain to get it clipped back in.