ill give it a shot thanks 

there is Pre and Post Facelift Gen 3 front shapes aye you'll need the same year pretty much,  otherwise you'll get about an Inch gap between the bumper & headlights

Are the bonnets from each revision interchangable? I don't know what revision my 1999 n/a b4 is but I have a bonnet with a hood scoop that looks pretty similar and I am wondering if it will fit on my car. 

Fitted quick release lever to OEM battery terminal… https://www.aliexpress.com/item/1005005754569067.html style 8 version as only wanted the cam lever and mount. just removed the square head bolt from OEM terminal. with 2 washers on the lever side, the OEM square washer from nut side swapped side and then OEM nut plus new round alloy nut to lock it in place.   will possibly do the positive side at a later date, but for now just disconnecting while car is sitting works ok.         testing external TPMS tire sensors. Since haltech have them as an option maybe they are good enough now. Have done only one rear tire as they do pose the risk if they loosen the tire will leak and go flat. They have a second nut that you tighten up behind them to lock them in place but still feels a little risky.   Got this one but the angle of the pivot for the device bs the mount/solar panel is around 60 degrees where windscreen is under 40 so it faces downwards. That means it has to be mounted Hugh on windscreen and that ain’t great as middle of windscreen has lots of dots and is also tinited. https://www.aliexpress.com/item/1005006245071744.html   maybe should have gotten this one as could either sit in socket in front of gear shift, or in the centre console storage bin socket. https://www.aliexpress.com/item/1005005592494107.html   may get another pump like this to AP carry in the car. These are hat come in swifts etc that have no spare tire. Just in case one leaks. https://www.aliexpress.com/item/1005005913525912.html  

It's starting to look like a Tesla.