Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

New rotors for my Brembo's...... Znoelli?


Recommended Posts

Hey guys,

It's new rotor and pad time for my front brakes and I'm after some reviews/suggestions for new ones.

I had a quote for genuine Brembo/STi Factory discs and nearly fell over at the price... $1128 EACH!!

Anyway I looking at spending up to $650 on a set of front rotors and upto $300 on pads, give or take $50 (maybe more if it's worth it).

Currently I'm looking at a set of Znoelli DDS rotors but all the reviews on here seem a little average and were mainly targeted at guys using them on the track (have done a chunk of research). I'm not participating in track days at all so really just after street use and I'm a bit of a nana driver.

Pads I was looking at are either some Race Brakes or Znoelli SP500's.

Please fire away with suggestions, reviews and other constructive advice.

Link to comment
Share on other sites

I run the cheapest rotors BNT sell on my race car, never had an issue coming up 3 seasons of racing on them. Not bad for under $100 each.

Pads i would suggest the Bendix SRT pads, they are the new ultimates so are probably dusty but they work from cold and are bloody hard to overheat. Depends if you just want looks or actually want your brakes to work?

Link to comment
Share on other sites

Like nztintin, I run whatever the cheap and cheerful BNT rotors are. I don't get anywhere near as much track time as him, but my brakes get a lot of hard work at other events. You certainly won't have any dramas with them on a street car/ daily driver.

Link to comment
Share on other sites

 GC8E2DD said:
Like nztintin, I run whatever the cheap and cheerful BNT rotors are. I don't get anywhere near as much track time as him, but my brakes get a lot of hard work at other events. You certainly won't have any dramas with them on a street car/ daily driver.

What pads Sam?

Link to comment
Share on other sites

 nztintin said:
I run the cheapest rotors BNT sell on my race car, never had an issue coming up 3 seasons of racing on them. Not bad for under $100 each.

Pads i would suggest the Bendix SRT pads, they are the new ultimates so are probably dusty but they work from cold and are bloody hard to overheat. Depends if you just want looks or actually want your brakes to work?

This here and my brakes are mean I run the Bendix Ceramics cuts back on dust and keeps ya wheels clean if your to go to the track every weekend by all means run that setup but otherwise a big waste of money remember your starting off with brembos to begin with.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...