BG5 Legacy GTB Wont Start

Hey everyone.

Just finished my rebuild on the legacy 1998 GTB.

Motor is in. I have cranking and almost running but cant quite get there.

I have fuel , spark & compression just no boom.

I have checked my vac lines and they all look to be in the correct place.

Im wanting to know if someone can post up a pic of their injectors (plugged in) and coils (plugged in)??? (Both sides)

This can then eliminate if I have them around the wrong way as the plugs are different colour. I have tried to look on google and on here but cant find anything.

I have replaced the crank sensor with a borrowed one but this makes no difference.

Cam sensor got replaced with the old crank sensor and it made it worse so Im thinking they are fine.

I double checked timing and it looks fine its more I think I have plugs around the wrong way (hopefully) or the timing is waaaay out.

Any advise or help would be much appreciated.

Thanks

Ray

Short injector plugs to front long to rear. Black rear grey front iirc.

Black plugs to the back. Because Subaru are racist both spark plugs and injectors

Ahh sweet could be my problem

I have the black plugs for the injectors at the back, Grey at the front but the spark plugs are the other way around. Cheers guys will let you all know if it works when I get home after work. I didn't need to pull the injectors themselves out to get the intake mani off so that's sweet.

You guys are legends. So the coil plugs were back to front swapped them over and away she went very happy man right now. Took it for a small run and she went perfectly.

Thanks for your help.

Haha now to fix the power steering issue that's just popped up.

Now sell the **** out of it and upgrade salesman.

 evowrx said:

Now sell the **** out of it and upgrade salesman.

Haha don't worry I will let her go soon. Will make a tidy profit out of it as well lol.