Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Ej20g/h into 95 liberty


Payney8

Recommended Posts

Hi,

I am in the process of converting a 95 liberty to run a ej20h. The ej20h has been rebuilt by myself and I'm 100% sure of the timing. I've got it cranking and the fuel pump priming but no spark. I have pulled the plugs and they are wet so I presume the injectors are firing. It has also backfired once and almost started once with nothing changed.

Problem is the engine harness has already been butchered from the chassis I had pulled it from. It looks as though he has tried to run .12v to the coils and use the ecu to supply signal. Before you start the ecu is the correct twin turbo one lol. I have the circle plug on the drivers side connected and the larger of the two black plugs on the left.

The smaller plug has been cut and I have the wires colour coded together except I have one purple and one black left on the chassis side and 1 g/black, 1 g/red and 1 white on the engine side left.

Also the twin turbo box is Mia and there seems to be no plugs left over for it anyway so I have no idea what harness they used on the original conversion. It did run though so I am at a loss currently. All I think off is that the outputs from the twin turbo ecu for the coils aren't wired to the same pins in my car.

Any help? I ca get pics if required.

Link to comment
Share on other sites

I'd be checking both the wiring is correct to the ignitors/coils and that the wiring from the crank and cam sensors is correct.

The cam and crank sensor wiring changes color on some models (i.e. white is positive on one and negative on the other).

Is there definitely spark from each plug too?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...