Jump to content
Please check your junk folder for registration emails ×
  • Current Donation Goals

    • Raised $0.00

Part 3: Hub Selection for 2 pot rears


Recommended Posts

the only thing to watch is that the v3 sti R and RA have solid rear rotors, they are unique like the hubs and they only take the one type of rotor, and its toootaly different from any other R180 rear end.

Same goes for the single pot sliders, they are the only type that have the narrow (from memory) bolt spacing.

TL:DR get the whole set up or dont bother.

Link to comment
Share on other sites

  • 1 year later...
 funkytown said:
Hub Selection for 2 pot Rears – for a V1-6 GC/GF

Hubs that CAN be used for 2 pot rear conversion on an R160 car ONLY.

Fortunately for v7/8 WRX (not considering v9+ due to PCD change) [/u]

have r160 hubs AND they have the narrow bolt spacing (these also come with 2 pot rears from factory).

Also worth noting in this selection process.. the r160/80 hub selection will determine the handbrake shoe diameter. This affects which rotor you chose for 2 pot rears:

For a r180 based set up you pick a rotor normally for a v4/6 STI RA or R.

For a r160 based set up you pick a rotor normally for a V7/8 WRX (not STI).

OK think I understand this now

[table=class: grid]

[tr][td]Model[/td][td]Fronts[/td][td]Rears[/td][td]Diff[/td][td]Rear Rotor[/td][td]Rear Rotor Size[/td][td]Rear Rotor Part#[/td][td]Rear Baking Plate Part#[/td][/tr]

[tr][td]JDM BD/BG turbo[/td][td]2pot sliding[/td][td]1pot sliding[/td][td]R160[/td][td]solid[/td][td]266x18(170)mm[/td][td][/td][td][/td][/tr]

[tr][td]JDM BE/BH[/td][td]2pot sliding[/td][td]1pot sliding[/td][td]R160[/td][td]solid[/td][td]290x10(170)mm[/td][td][/td][td][/td][/tr]

[tr][td]JDM BE/BH RS/GTB RS30[/td][td]2pot sliding[/td][td]1pot sliding[/td][td]R160[/td][td]vented[/td][td]290x18(170)mm[/td][td]26700AE030 / DBA653[/td][td]26704AE020 & AE030[/td][/tr]

[tr][td]JDM GDA WRX NA / NB[/td][td]2pot sliding[/td][td]1pot sliding[/td][td]R160[/td][td]solid[/td][td]266x10(170)mm[/td][td]26310AA051[/td][td]26255AA061 & AA071[/td][/tr]

[tr][td]JDM GDAC WRX NB-R[/td][td]4pot[/td][td]2pot[/td][td]R160[/td][td]vented[/td][td]290x18(170)mm[/td][td]26700AE030 / DBA653[/td][td]26704FE090 & FE080[/td][/tr]

[tr][td]JDM GDB STI Sedan[/td][td]4pot gold brembos[/td][td]2pot gold brembos[/td][td]R180[/td][td]vented[/td][td]316x20(190)mm[/td][td]26700FE000[/td][td]26704FE000 & FE010[/td][/tr]

[tr][td]JDM GGB STI Wagon[/td][td]4pot[/td][td]2pot[/td][td]R180[/td][td]vented[/td][td]290x18(190)mm[/td][td]26710FA130 / DBA656[/td][td]26704FE020 & FE030[/td][/tr]

[/table]

Edited by kamineko
Link to comment
Share on other sites

  • 4 years later...
On 3/18/2019 at 1:12 AM, FasterLouder said:

I was just told that fitting newage (Version 8) hubs to a Classic GC8 throws the camber out of whack and I'd need some Whiteline camber  adjustment bolts to rectify this.
Can anyone verify?

I have them on my GC8, camber is fine -1.5 degrees. 

 

The GD sedan struts are what causes the camber change.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recent Status Updates

    • MrSg9Sti04

      Afternoon team,
      im new to the group first time posting. Im hoping some body can help me get my launch control all dialled in on my link g4x. Ive had the computer and car all tuned from chris at prestige awesome knowlegable guy super happy with the results but now im wanting to get my launch/anti lag all dialled in. Ive been reading multiple different forums etc all with different conflicking information which has made me nervious with what do i listen to this or that if you get what i mean. Now ive started to make myself familiar with my PClink software etc the past few weeks and im eager to learn how to do minor setups or tweaks etc so im not relieing on my tuner so much and obviously saving myself abit hurt in the back pocket. 
      Now back to the question at hand.... Im wondering if theres and one who could please share there knowledge and wisdom with setting all my values, timing, fuel etc when i have launch control armed and engaged, or even a launch tune file they can possibly send me to load onto my tune. Ive figured out the setup of my digital inputs turning launch control on etc and its obvisously on its pre set factory settings. It engages but doesnt sound the greatest or as angry as it should i feel. Hence reaching out to you good buggers. 
       
      Cheers in advance for any info and help yous maybe able to give me.
       
      Cheers Shaun
      · 0 replies
    • Joker  »  gotasuby

      updated your DP's too : hope that's ok!
      · 0 replies
    • Joker  »  SAS

      Updated your DP's to reflect your business page  
      · 0 replies
    • Joker  »  Nachoooo

      Updated your Avatar : couldnt help myself  cheers!
      · 0 replies
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    40.9k
    Total Topics
    573.5k
    Total Posts


×
×
  • Create New...