Hi guys have a v1 gc8 that I've got some top feed rails and pink injectors for. The injectors all fit in fine with all seals in place but they are still able to spin? No movement side to side or up and down just spin. And also will I have to cut and change the plugs? Side feed plugs don't quite fit? If anyone knows then some help would be appreciated on which wire goes where etc etc cheers
Yip have checked for cel codes and no codes. And thanks for the link will have another look tommorow. Sorry if it came off like a bit of an attitude. Just frustrated with it now
Actually no I replaced spark plugs with new 1s. then removed them with the coil and tried it up against the block like suggested and there was a spark but was very weak. I also swapped coils with the ones from the opposite side to see if there was any change and there wasn't. Still no difference in revs when unplugging while running compared to the other side. I'm obviously not clued up in that side of things which is why I asked if there is anyone in Auckland that could come and have a look. And the 2v was found using a multi meter While coil was unplugged and running
So did the block on the plug test and sparks but a really weak spark. Tested with multi meter and those 2 cylinders only had 2 volts running through them? Is that right? also what voltage are injectors supposed to be at when pulsing?
Yip tried that aswell to rule it out etc. Plugs with the white strip on it to the 2 front cylinders on both the coils and injectors because subarus are racist lol
Ok so now back to square 1...... tested injectors with multi meter and there is injector pulse. If I pull the injector plugs from passenger side the revs don't drop straight away but slowly start dropping to the point of hunting for revs. So I'm back to thinking maybe coils? Or could it be something else? Maybe a blocked injectors or something? So confused right now
Have checked all the wiring and nothing burnt out or frayed or shorting on anything. Everything is still in its factory wrapping untouched etc. Opened some areas to check and have found nothing? Possibly a stuffed ecu?