Do you use the bpme app? I noticed one day that there wasn’t a charge on my card and emailed bp and they said my car was now on the list and I would have to go instore to pay. Apparently if your phone loses connection during the process the payment doesn’t go through and when you activate the pump then you have just 90 seconds to lift the pump or it cancels the process. Sent from my iPad using Tapatalk Pro
Yeah now the missus can talk on her phone legally when she borrows my car at lunchtime. Can always tell when she has been using her phone cos I hop into my car and the stereo has been turned all the way down. Sent from my iPad using Tapatalk Pro
These might come in handy... https://www.dropbox.com/sh/bocuh183lyv2rwy/AACUqbVOdiBW7Rtw0sdtALGDa?dl=0 Downloaded them from below ages ago. Seems links are dead now.
You have the harness so it is super simple! Plug the harness in between the ecu and stock harness then plug the bullet connectors into the harness. It does look like you need to solder/splice a few wires back together on the controller. You can remove the face plate from the main board if you need better access. I have a spare controller at home that doesn’t work so can take some pics later so you can see where that wire goes if need be?
Thought so! Looked like it was an awesome turn out! I drove through on my way to my cousins in laws in my rev d. Would have stopped and said hi if we weren’t running late. Sent from my iPhone using Tapatalk Pro
Yeah I bought the same lip for my rev D and yeah the earlier revisions bumper is different so its not going to fit easily. The lip you want looks like this...
Yeah it can do. A couple of other things to check are that the exhaust control valve isn't stuck either opened or closed. That the bypass control valve isn't leaking and that the intercooler valve is opening and closing. For the first and last point you could chuck it into diagnostic mode where it cycles the fans and actuators briefly and see if they move. Sent from my iPhone using Tapatalk Pro